Start air drying your laundry today with this umbrella clothesline outdoor dryer. Air drying is better for your clothes and helps you save on your utility bills, and you can get started today with this efficient and compact dryer. This umbrella dryer consists of two parts: a galvanized steel pole and aluminum topper. To set up the dryer, the pole is secured in the ground with a ground sleeve. The collapsible aluminum top can then be unfolded and added to the pole. The top and steel post can be removed at will, so you can bring the clothesline inside during inclement weather. The top also rotates, giving you easy access to each side when loading or unloading the dryer. The dryer’s angled lines increase airflow and improve circulation, ensuring that no matter how full you load this dryer, your items will dry more quickly and evenly. With up to 165 feet of drying space, you can easily dry multiple loads at once. To install with ground sleeve (included): 1. Dig a hole 8-12 inches in diameter and 20 inches deep. The hole should be wider at the bottom than at the top. 2. Fill the hole with about 3 inches of small rocks, then pour about 6 inches of concrete into the hole (or until concrete comes to the bottom of the ground sleeve when held flush with the ground). 3. Holding the sleeve in place, finish filling the hole with concrete (you may leave a small gap to fill in with dirt and grass if you wish). 4. Immediately run a stick or tube through the sleeve and through the concrete to the rock base to allow water to drain. 5. Insert the lower vertical pole of the dryer into the sleeve, then use a level to align the pole vertically. 6. Remove pole and allow concrete to set fully, then install your dryer. Includes 1-year warranty.